Pontiac Crankshaft Pulley 2V (1969 1/2 - 1970)

Billet Aluminum Pontiac Crankshaft Pulley (1969 1/2 - 1970)

2 Groove Crankshaft Pulley for Pontiac Engines (350 - 400, 428 & 455).  Designed for use with factory stock power steering and alternator brackets. If using CVF Racing brackets, use part number PONT2CR instead.

Fits vehicles with:

• 1968 or newer dampener
• 1969 1/2 or newer water pump (4.5" from flange to engine block)
• Factory 1969 or 1970 brackets (Will not fit CVF Racing Brackets)

Equivelent to OEM part number 9790846-YA

Pontiac V8 Engines (350 - 400, 428 & 455)

• 1969-70 Pontiac Passenger Cars
• OEM Brackets that are correct for 69-70 model year

Note: Requires OEM alternator / power steering brackets from 1960-70 year.  Will not fit if you have CVF Racing Bracktes or brackets from other year engines

Generally fits the following models with original 350, 400, 428 & 455 engines installed. 

• 1969 - 1970 Pontiac GTO
• 1969 - 1970 Pontiac Grand Prix
• 1969 - 1970 Pontiac LeMans
• 1969 - 1970 Pontiac Bonneville
• 1969 - 1970 Pontiac Firebird
• 1969 - 1970 Pontiac Transam
• 1969 - 1970 Pontiac Catalina
• 1969 - 1970 Pontiac Tempest
• 1969 - 1970 Pontiac Ventura

This is not a complete list.  If you have a question about application, please e-mail us. It is not recommended that you select pulleys solely based on model and year alone because often the original engine has been swapped.

Diameter: 6.2" Overall Length: 1.65" Grooves: 2 Bolt Pattern: 4 Bolt Bolt Circle: 3.75" Pilot Diameter: 2.5"

QUESTIONS? CLICK HERE TO VIEW OUR PONTIAC SELECTION GUIDE