Ford 0.625" Crank Pulley Spacer - 4 Bolt

Billet Aluminum Ford Small Block Crankshaft Pulley Spacer (4 Bolt)

Use this .625" thick spacer with SBFL series pulleys and the following dampers:

• Fluidampr

Note: Other aftermarket balancers generally requires .950" spacer, OEM 4 bolt damper does not require a spacer

289, 302 & 351W Engines with aftermarket damper

• 1969 1/2+ Ford passenger cars
• 1977+ Ford trucks
• All Ford 351 Cleveland Engines (351C) 
• All Ford 351 Modified Engines (351M) 
• All Ford 400 V8 Engines

Fits the following models with original 289, 302 & 351W small block engines installed. Note: 1969 model year was a transition year for small blocks and you need to check your water pump and number of bolts on crank pulley.

• 1969 - 1985 Ford Mustang
• 1974 - 1978 Ford Mustang II
• 1972 - 1975 Gran Torino
• 1969 - 1974 Ford Galaxie 500
• 1969 - 1970 Ford Fairlane
• 1962 - 1970 Ford Falcon
• 1969 - 1985 Ford Thunderbird
• 1977 - 1979 Ford Ranchero
• 1977 - 1985 Ford Bronco
• 1977 - 1985 Ford F-150
• 1977 - 1985 Ford F-250
• 1977 - 1985 Ford F-350

This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select small block pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford small block pulleys should be which side the lower radiator hose is on and number of crank pulley bolts

Diameter: 4.4" Length: 0.625" Bolt Pattern: 4 Bolt Bolt Circle: 3.25"