Ford 289, 302, 351W Water Pump Pulley 2V (3 Bolt Crank - High Flow)

Billet Aluminum Ford Small Block Water Pump Pulley - V-Belt (4 Bolt)

2 Groove Water Pump Pulley for 289, 302 & 351W.

5.4" Diameter for Increased Cooling Flow (Overdrive).

Application:

Ford Passenger cars 1964-1969
Ford Trucks 1964-1976

Fits vehicles with:

1) Factory 3 bolt damper (Aftermarket dampers may require 0.950" spacer)
2) Water Pump with Passenger side lower radiator hose.
3) Dampener face to water pump flange face 3-7/8"

Made in the USA

Material: 6061-T6 Billet Aluminum

• 1964 - 1976 Ford trucks

Fits the following models with original 289, 302 or 351W engines installed. If you have a newer engine with 4 bolt damper installed, use SBFS series pulleys instead. Note: 1969 model year was a transition year and you need to check your water pump and number of bolts on crank pulley.

• 1964-1969 Ford Mustang
• 1968-1974 Ford F-100 Pickup
• 1964-1969 Ford Fairlane
• 1962-1969 Ford Falcon
• 1962-1967 Ford Galaxie
• 1962-1969 Ford Holden
• 1968-1969 Ford Torino
• 1964-1969 Ford Thunderbird
• 1964-1977 Ford Ranchero
• 1966-1977 Ford Bronco
• 1975-1977 Ford F-150

This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford pulleys should be which side the lower radiator hose is on and number of crank pulley bolts

Diameter: 5.4" Overall Length: 2.6" Grooves: 2 Bolt Pattern: 4 Bolt Bolt Circle: 1.75" Pilot Diameter: 5/8"