Ford Water Pump Pulley 3V 302, 351W, 351M & 400 (High Flow)

Billet Aluminum Ford Small Block Water Pump Pulley V-Belt (4 Bolt Damper)

5.4" Diameter for high water flow applications (over-drive)

3 Groove Water Pump Pulley for:

• 1969 1/2+ Ford 289, 302 & 351W passenger cars
• 1977+ Ford trucks
• All Ford 351 Cleveland Engines (351C) 
• All Ford 351 Modified Engines (351M) 
• All Ford 400 V8 Engines

Fits vehicles with:

• Factory 4 bolt damper (Aftermarket dampers may require 0.950" spacer)
• Water Pump with Driver's side lower radiator hose.
• Dampener face to water pump flange face 3 1/4"

Use with CVF Racing Pulley SBFL3CR-3 (Not SBFL3CR)

Fits the following models with original 289, 302 & 351W small block engines installed.

Note: 1969 model year was a transition year for small blocks and you need to check your water pump and number of bolts on crank pulley.

• 1969 - 1985 Ford Mustang
• 1974 - 1978 Ford Mustang II
• 1972 - 1975 Gran Torino
• 1969 - 1974 Ford Galaxie 500
• 1969 - 1970 Ford Fairlane
• 1962 - 1970 Ford Falcon
• 1969 - 1985 Ford Thunderbird
• 1977 - 1979 Ford Ranchero
• 1977 - 1985 Ford Bronco
• 1977 - 1985 Ford F-150
• 1977 - 1985 Ford F-250
• 1977 - 1985 Ford F-350

This is not a complete list. If you have a question about application, please e-mail us. It is not recommended that you select small block pulleys based on model and year alone because often the original engine has been swapped. The over-riding factor in selecting the right Ford small block pulleys should be which side the lower radiator hose is on and number of crank pulley bolts

Diameter: 5.4" Overall Length: 2.9" Grooves: 3 Bolt Pattern: 4 Bolt Bolt Circle: 1.75" Pilot Diameter: 5/8"

QUESTIONS? CLICK HERE TO VIEW OUR FORD SMALL BLOCK SELECTION GUIDE